Scope of work (Low Current & Security System)
Installation of a server, low-current, and security system for a bank. This SOW is designed to be adapted for a specific project, incorporating relevant local banking regulations (SAMA Cybersecurity Framework for Saudi Arabia) and international standards. All work, materials, and methodologies must adhere to the following key standards, with particular emphasis on the SAMA Cybersecurity Framework and the TIA-942 standard for data center design.
1. Server Room & Data Center Infrastructure
Physical & Architectural Requirements: the server room is an independent, enclosed space with solid concrete walls, with only one or two controlled entry doors.
Fire Suppression: install an FM-200 gaseous fire suppression system, compliant with NFPA 2001.
Raised Flooring: install a raised access floor (600mm high).
Power & UPS: provide two independent power feeds from the main switchgear to the server room (40KVA), with an N+1 redundant UPS configuration for server racks and a 30-minute battery runtime at full load for controlled shutdown.
Power Distribution: install two separate Power Distribution Units (PDUs) per rack with smart metering.
Precision Cooling: deploy N+1 redundant CRAC/CRAH units with variable speed fans and hot-aisle/cold-aisle containment, maintaining server room temperature at 20°C–24°C (±1°C) and relative humidity at 45%–55% (±5%).
Environmental Monitoring: install a comprehensive BMS/EMS monitoring system for power, temperature, humidity, leak detection (under raised floor), smoke detection, and door contacts, connected to the central BMS with SMS and email alerts.
Racks & Cabling Management: supply and install 8x 42U server racks (black), with all server and switch cabling managed by vertical/horizontal cable managers.
2. Low-Current & Network Systems
Backbone Cabling: install OS2 single-mode fiber between server rooms, IDF/MDFs, and all security headends, with 100% redundancy for core links.
Horizontal Cabling: deploy Cat 6A U/FTP cabling to all data outlets, with approximately 3 data outlets per workstation (83 points), plus dedicated outlets for IP cameras, door controllers, Wi-Fi APs, printers, and teller stations.
Core Switches: deploy two redundant, modular core switches (Cisco Catalyst 9500 or 9600).
Access Switches: install PoE+ switches in all IDFs to power cameras, WAPs, and IP phones.
Routing & Firewall: install enterprise routers with DDoS protection and a Next-Generation Firewall cluster (A/P) with IPS/IDS, application control, and full SSL inspection.
IP Telephony (VoIP): deploy a Cisco Unified Communications Manager (CUCM) PBX platform with IP phones for all staff (Cisco 7800 and 8800 series with encryption).
High-Availability Wi-Fi: provide Cisco Wi-Fi 6/6E APs for 100% coverage, implementing WPA3-Enterprise with 802.1X RADIUS authentication.
3. CCTV & Video Surveillance
Deploy a fully digital, 4K IP-based surveillance system with centralized management software.
Strategic Coverage: full coverage for all public entrances/exits, all teller and customer service counters, safe deposit and vault rooms, all ATM vestibules, server rooms, IT and wiring closets, high-value transaction areas, and all employee entrances and corridors (73 cameras).
Minimum Camera Performance: 8MP (4K) resolution; facial and license plate capture at 20m range with clearly visible facial features and vehicle plates; centralized NVR with enterprise hard drives providing 90 days of continuous recording.
Tamper Detection: all cameras must support video motion tamper detection.
4. Access Control System (ACS)
Platform: a hardware/software system for electronic door control.
Card Credentials & Readers: 13.56 MHz smart card readers with keypad for multi-factor authentication (card + PIN).
Biometric Readers: for server rooms and high-security zones, install fingerprint and/or facial recognition readers.
Door Hardware: install electric door strikes and heavy-duty magnetic locks that interface with the fire alarm system for “fail-safe” unlocking in emergencies.
Controlled Doors: secure all sensitive areas.
Visitor Management: provide a dedicated kiosk station to issue temporary cards.
5. Intrusion Detection System (IDS)
Alarm Control Panels: install a professional, bank-grade alarm panel.
Perimeter Protection: magnetic contacts on all external doors and PIR motion sensors in all high-risk zones (main lobby after hours).
Duress Alarms: install a silent “hold-up” button (HUB) at each teller station.
6. ATM Security
For each ATM machine, provide a dedicated camera with a clear view of the user’s face as well as a clear view of the area around the machine, to record any suspicious activity.
7. Intercom & PA
Install IP-based video intercoms at all public entry points.
8. Integrated Security Management Center (SMC)
A central physical location that houses the main server racks for security applications, the video wall, and the operator consoles.
The SMC will integrate and cross-reference events between systems: Video Verification of Alarms – an intrusion alarm triggers the nearest CCTV camera feed; Access & Video – a card swipe is logged and the system pulls up the video of that door at that time; Centralized Logging – a Security Information and Event Management (SIEM) system collects logs from servers, firewalls, and ACS.
Provide a modular operator console and a video wall of 4×4 55-inch commercial displays.
9. Testing, Commissioning & Quality Assurance
Cat6A Cabling: 100% Fluke DSX certification.
Access Control: 100% functional test of every lock, reader, and contact.
CCTV: coverage verification (camera angle and focus) and recording verification.
UPS & Generator: simulated load transfer tests (mains → UPS → generator).
The installed system must be tested against SAMA and PCI DSS Requirement 9 physical security standards.
A formal risk assessment will be conducted post-installation.