Scope of work (Low Current System)
The Digital Supplies Establishment proudly completed the following scope of work:
Audio and Lighting Systems – Full installation and integration of sound and lighting systems.
Curtain Control Units – Implementation of control systems for more than three (3) layers of curtains.
Backup Power Systems & Generators – Supply and installation of emergency power systems and electrical generators.
Centralized Control Integration – All of the above systems (audio, lighting, curtains, and backup power) were fully interconnected and integrated to be managed seamlessly through unified control panels.
1. Audio System
Supply and install CU6011 Central Unit (Qty. 6)
Supply and Install Array Speakers (14 Speakers x 4 array) from Klipsch.
Supply and Install Mixer TASCAM SS-R1 (Qty. 6).
2. Lighting System
Supply and install front of house (FOH), side, back, stage wash, cyclorama, and specials (more than 1,700 pcs)
Design dimming and power distribution (constant power vs. dimmed circuits)
Plan cabling routes (DMX, Ethernet, power) to avoid interference with audio and curtain systems.
Install lighting bars, trusses, and hoists (coordinated with the curtain control system where motorized).
Hang and clamp all lighting fixtures in designed positions.
Connect DMX / Art-Net cables from each fixture to the lighting control rack.
Install the lighting console (Avolites) and network nodes.
3. Power Protection
Supply and Install power stabilizer Surgex SX1213i (Qty. 12)
Supply and install UPS APC SRT3000RMXLW (Qty. 6)
Supply and install Batteries APC SRT96RMB (Qty. 32)
Run power cables from the backup power system (generator/UPS) to lighting dimmer racks and distribution panels.
4. Control Units
Install touch panel control stations interfacing with the unified theater control panel (curtain, audio & lighting integration).
Integrate the lighting control processor with the central control system (AMX).
Program the unified control panel with lighting scenes (“Presentation”, “Intermission”, “Blackout”, “Rehearsal”).
Set up triggers between lighting and curtain controls — e.g. curtain opens → stage lights fade up.
Coordinate lighting cues with the audio system for show-critical events.
Patch all fixtures with correct addresses in the lighting console.
Create basic palettes (colors, gobos, positions, beam shapes).
Program preset scenes for different theater uses: general house lights, stage wash, spotlight positions, silent blackout & emergency egress lighting.
5. Cabling & Backbone
Connecting all devices with Cat6A (CommScope) to a Cisco 2960 switch.
Connecting all speakers, array speakers and microphones with Belden audio cable.
Cabling control cable to every light unit on stage and throughout the theatre.
Connecting lighting distribution to the emergency power supply so essential lighting works during an outage.
Installing grounding and surge protection for all lighting equipment.
6. Documentation & Training
Create as-built drawings showing cable routes, DMX addresses and circuit numbers.
Write a lighting operation manual for theater staff.
Train operators on both the lighting console and the unified control panel.
Provide a maintenance checklist (cleaning fixtures, lamp replacement, software updates).
Conduct a full technical rehearsal with the client and adjust lighting levels based on feedback.
Obtain sign-off for the lighting system as part of the overall theater project.