Scope of work (Low Current & Electrical System)
This scope of work encompasses the complete design, supply, installation, testing, commissioning, and handover of all structured cabling, network infrastructure, low-current systems, power works, and a centralized KNX-based smart home automation platform for a prestigious Royal compound. The compound consists of six distinct structures requiring different but integrated levels of service: the Main Palace – the primary residential, administrative, and representational building, requiring the highest level of security, resilience, and system density; four Villas for the Owner’s Sons – high-end, private family residences, each with an identical suite of automation and low-current systems; the Woman’s Majlis – an independent ceremonial and social reception hall for women, requiring its own dedicated headend, secure audio/video processing, and independent yet network-connected automation; the Man’s Majlis – the counterpart for men, demanding advanced audio-visual capabilities for presentations and large gatherings, plus full climate and lighting orchestration; and the Entertainment Villa – a dedicated leisure structure for home theater, gaming, spa and sports viewing, requiring high-performance audiovisual systems, immersive automation scenes, and seamless integration with the palace for content sharing.
1. Structured Cabling & Network Backbone
Backbone: Install a redundant, high-speed fiber optic backbone (SMF/OM4) linking the Main Palace, the four Villas, both Majlises, and the Entertainment Villa, with a central MDF in the Palace housing the core network and each building having its own IDF.
Horizontal Cabling: Deploy Category 6A (Cat6A) shielded cabling for all data, voice, and control endpoints, with single and double-gang RJ45 outlets for user devices and system equipment as per architectural layout.
Core Switching: Install an enterprise-grade (e.g., Cisco Catalyst) core switch stack in the Palace MDF with 10/40Gb uplinks.
Access Switching: Managed PoE+ switches in each building’s IDF to power IP cameras, access control panels, IP telephones, and Wi-Fi access points.
Wi-Fi: Implement a mesh or controller-based Wi-Fi 6/6E system providing seamless coverage to all interior and key exterior areas, using hidden or architecturally discreet access points in the Majlises and Palace.
Firewalls & Security: Deploy a next-generation firewall (NGFW) for network security, content filtering, and secure VPN access for remote management.
2. CCTV System
Deploy a 4K IP-based surveillance system with high-definition dome and bullet cameras for all entries, parking areas, perimeters, and strategic interior zones (entrances, corridors, sensitive rooms).
Install ANPR (Automatic Number Plate Recognition) cameras at the main compound gates, and facial recognition cameras for authorized personnel and VIP identification.
Provide a centralized NVR (Network Video Recorder) with a minimum 30-day storage capacity and remote viewing capability.
3. Access Control System (ACS)
Install a biometric and smart card access system for all 34 (or more) identified doors, including fingerprint and/or facial recognition readers for high-security areas (Palace private zones, server rooms, Majlis entrances), and proximity card readers for general staff areas.
Supply electromagnetic locks or electric strikes, door contacts, and request-to-exit buttons.
Integrate with KNX to trigger “welcome” lighting scenes upon authorized entry.
4. Intrusion Detection System (IDS)
Install PIR (Passive Infrared) and magnetic contact sensors on all ground-floor windows and secondary doors, connected to a 24/7 monitored alarm system with integration to the ACS.
5. Audio & Video Signal Distribution (AV over IP)
Deploy an AV over IP matrix (e.g., using IP-based encoders/decoders) allowing any video source (media players, satellite receivers, cameras) to be displayed on any screen across the compound.
Provide user-friendly touch panels or remotes in each room to select content; this system will also feed the central public address (PA) and background music system, with individual zone control.
6. Public Address (PA) & Background Music System
Install a distributed, paging-ready PA system for each building, integrated with the fire alarm system for emergency announcements.
Use the same speakers for streaming high-fidelity music from a central media server, local device inputs, or internet radio sources, controllable via wall panels or mobile app.
7. IP Intercom
Deploy a video-enabled, IP-based intercom at the main security gate, palace entrance, majlis entrances, and staff station points, integrated with the KNX and ACS systems to allow remote door release.
8. Structured Wiring & Racking
Provide 19-inch equipment racks in each building’s designated telecom room with passive patch panels (Cat6A and fiber), active network switches (PoE+), UPS systems, and servers for management platforms.
Cable Management: all cabling neatly bundled, labeled per industry standards, and secured using J-hooks, ladder racks, or conduit as appropriate.
9. Fire Alarm & Life Safety Integration
Supply and install an addressable fire alarm panel for each building, with all necessary smoke/heat detectors, manual call points, sounder/beacons, and alarm notification devices.
Integration: relay the fire alarm status (trigger signal) to the KNX system to automatically unlock all access-controlled doors in the affected zone/building, cut off ventilation and air-handling units to prevent smoke spread, trigger emergency lighting and flashing beacons, and send an alert to security and a central monitoring station.
10. Lightning Protection & Surge Suppression
External Protection: install a complete lightning protection system (air terminals, down conductors, grounding network) for all buildings in compliance with international standards (e.g., NF C 17-102, IEC 62305).
Internal Protection: equip all main distribution boards, ELV racks, and sensitive electronic equipment with Type 1 and Type 2 surge protection devices (SPDs) to guard against transients from lightning or grid switching.
Grounding: establish a common, low-resistance (≤1 Ω) grounding network for all buildings, tying together electrical, telecommunication, and lightning protection earths.
11. Power Works
Main & Sub-Distribution: coordinate with the local utility for a dedicated transformer (2 MVA for a compound of this size) based on the estate’s load calculation; the Palace will have its own main low-voltage switchboard (MLVS).
Panelboards: provide a main distribution panel (MDP) in the Palace, and sub-distribution panels (SDPs) in each Villa, Majlis, and Entertainment Villa, with adequate spare ways for future expansion.
Feeder Cables: run heavy-duty, low-voltage armored cables from the Palace MDP to each SDP, sized for full load and voltage drop.
Lighting & Power Circuits: install dedicated lighting circuits for each room/zone, controlled by KNX or traditional switches, with dimmable LED drivers for all general lighting.
Convenience Outlets: install appropriately spaced general-purpose outlets rated 13A–16A, with USB-charging ports at strategic locations.
Specialty Circuits: provide dedicated circuits for kitchen appliances (ovens, hobs, refrigerators, dishwashers), laundry equipment, HVAC equipment (AHUs, FCUs, heat pumps), IT and AV racks (isolated power for sensitive electronics), and fountains, landscape lighting, irrigation pumps, and other external loads.
Emergency & Standby Power: supply and install a sound-attenuated diesel generator (250 kVA) for the Palace and common facilities, with auto-start and auto-transfer switch (ATS) for seamless backup.
Uninterruptible Power Supply (UPS): provide online double-conversion UPS units – Palace: 2×20 kVA units (N+1 redundancy) for the data center, security room, and AV rack; Villas: 1×5–10 kVA UPS per villa for the local rack and selected outlets; Majlises: 1×10 kVA for the AV and control headend; Entertainment Villa: 1×10 kVA for the home theater equipment.
Battery Bank: sized to support 30–60 minutes of full load runtime, with automatic generator start as the fallback.
Earthing & Bonding: install a TN-S or TN-C-S earthing system with a dedicated earth bar at each panel; bond the lightning rods, water pipes, gas lines, ductwork, and structural steel to the main earth grid.
Cable Management & Finishing: run all power cabling inside PVC, EMT, or rigid conduits embedded in walls, floors, or within ceiling voids, with proper separation from low-current cables (min 30 cm or shielded trays); use 9cm deep, fire-rated junction boxes for all connection points; finish with switches, outlets, and other visible devices from a premium architectural series (Jung) with custom-matching colors/finishes to the room décor.
12. Smart Home Automation (KNX) – System Architecture & Backbone
The core automation bus shall be KNX (ISO/IEC 14543), providing a decentralized, peer-to-peer, multi-vendor open standard.
Install a combination of twisted pair (TP) and IP (KNXnet/IP) lines for flexibility – TP for reliable, no-latency actuator/sensor communication within each building, and IP (via the structured cabling network) for high-speed backbone, remote access, and integration of media and multi-touch panels.
Lines & Devices: Main Palace 10 KNX lines, each Villa 3 lines, each Majlis 2 lines, Entertainment Villa 3 lines – a total of 611+ KNX devices (sensors, actuators, and interfaces).
13. KNX Lighting Control & Scenes
KNX dimming actuators and switching actuators for all lighting loads, with DALI gateways for integration with high-end architectural dimming zones.
Functions: centralized and decentralized control (individual room keypads, touchscreens, mobile app), with programmed scenes: “Welcome” / “Departure” / “Dinner” / “Evening” / “Cleaning” / “Security”.
14. KNX HVAC Control
Interface with the VRV/VRF system (Daikin) or FCU controllers (Modbus-to-KNX gateway).
Per Room: KNX thermostats (or virtual interface via touch panel) in every habitable room, setpoint adjustment ±1°C, with separate temperature and humidity sensors for common return air.
Zone scheduling, setpoint limiting, energy-saving “unoccupied” setbacks, and central commands (e.g., “Shut down all HVAC during a fire alarm”).
15. Motorized Shading & Blinds
KNX actuators to manage the estate’s motorized roller blinds, blackout curtains, and sheer fabrics.
16. Audio-Visual & Home Theatre Integration
Via KNX IR interface, control each building’s AV distribution matrix, home theater projector, screen, receiver, and streaming devices.
A KNX touch panel can trigger the “Movie” scene: dim lights to 5%, lower the projector screen, close all blackout curtains, set HVAC to 22°C, and start the AV system.
Multi-room Audio: control of source selection, volume, and zones via KNX touch panels or a mobile app.
17. Irrigation, Pool, Spa & Fountain Control
Irrigation: KNX actuator connected to a solenoid-based irrigation controller, with a KNX weather station (rain, evapotranspiration data) and time schedule.
Pool, Spa & Fountain: KNX dry-contact relays to start/stop pool pumps, heaters, and water features; KNX dimmer for submerged pool/spa lighting (LED); temperature sensors and flow switches for alarms.
18. Gate & Garage Door Automation
KNX on-off actuators for electromechanical gate openers and garage door openers, with KNX binary inputs to receive door open/closed status.
Automated Sequences: KNX programmable logic to create “Arrival” (open gate, open garage, activate driveway lights) and “Departure” (close gate, lock doors) scenes, triggered by a dedicated keypad, mobile app, or vehicle transponder.
19. User Interfaces
Wall-Mounted Keypads: Jung 4–8 button keypads in each room (stainless steel finish).
Touch Panels: 10.1-inch in-wall touch panels in strategic positions – palace living areas, majlis entrances, and main bedrooms.
Mobile App: a branded, secure mobile application (for Android and iOS) for remote control of the entire estate, accessible only via VPN or with integrated two-factor authentication.